● 1G3F+WIFI+USB is designed as HGU (Home Gateway Unit) in transfer data FTTH solutions; the carrier-class FTTH application provides data service access.
● 1G3F+WIFI+USB are based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● 1G3F+WIFI+USB adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunication EPON CTC3.0. ● 1G3F+WIFI+USB are compliant with IEEE802.11n STD, adopts with 2x2 MIMO, the highest rate up to 300Mbps. ● 1G3F+WIFI+USB are fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. ● 1G3F+WIFI+CATV+POTs+USB are designed by Realtek chipset 9603C.> Supports Dual Mode (can access GPON/EPON OLT).
> Supports GPON G.984/G.988 standards and IEEE802.3ah. > Support 802.11n WIFI (2x2 MIMO) function > Support NAT, Firewall function. > Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect > Support port mode of VLAN configuration > Support LAN IP and DHCP Server configuration
| Technical Item | Details |
| PON interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN Interface | 1x10/100/1000Mbps and 3x10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| USB Interface | Standard USB2.0 |
| WIFI Interface | Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: Multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM |
| POTS Port | RJ11 Max 1km distance Balanced Ring, 50V RMS |
| LED | 8 LED, For Status of WIFI、WPS、PWR、LOS/PON、LAN1~LAN4 |
| Push-Button | 4, for Function of Power on/off, Reset, WPS, WIFI |
| Operating condition | Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition | Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply | DC 12V/1A |
| Power Consumption | <6W |
| Net Weight | <0.4kg |
> Support TR069 Remote Configuration and WEB Management > Support Route PPPOE/IPOE/DHCP/Static IP and Bridge mixed mode > Support IPv4/IPv6 dual stack > Support IGMP transparent/snooping/proxy > In compliant with IEEE802.3ah standard > Compatible with popular OLT(HW, ZTE, FiberHome,)Q1. What is the chipset used by XPON ONU equipment? A: XPON ONU equipment adopts Realtek chipset, specifically RTL9603C+RTL8192FR chipset. Q2. What ports are available for XPON ONU equipment? A: XPON ONU equipment has 1 Gigabit port and 3 100M ports. Q3. Does XPON ONU support WIFI signal amplification? A: Yes, XPON ONU device supports WIFI signal amplification function. Q4. Can XPON ONU equipment be used as a router? A: Yes, XPON ONU devices can be set to function as routers in addition to other functions. Q5. Does the XPON ONU need fiber access? A: No, XPON ONU equipment does not need fiber access.● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ● Typical Service：Broadband Internet access, IPTV, VOD, video surveillance etc.| Pilot Lamp | Status | Description |
| WIFI | On | The WIFI interface is up. |
| Blink | The WIFI interface is sending or/and receiving data (ACT). | |
| Off | The WIFI interface is down. | |
| WPS | Blink | The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN1~LAN4 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
| Blink | Telephone has registered and data transmission (ACT). | |
| Off | Telephone registration is incorrect. |
| ONU Model | CX21141R03C | CX21041R03C | CX20141R03C | CX20041R03C |
| Feature | 1G3F CATV VOIP 2.4GWIFI USB | 1G3F CATV 2.4GWIFI USB | 1G3F VOIP 2.4GWIFI USB | 1G3F 2.4GWIFI USB |
Follow my guide to see how to set the WIFI working frequency band, SSID name and SSID password！
Basic setting menu - set WIFI working frequency band and set SSID name.
| Product Name | Product Model | Descriptions |
| XPON 1G3F WIFI USB ONU | CX20041R03C | 1*10/100/1000M and 3*10/100M Ethernet interface,USB interface,1 PON interface, support Wi-Fi function, Plastic casing, external power supply adapter |
