● 1GE+CATV+VOIP is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.
● 1GE+CATV+VOIP is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● 1GE+CATV+VOIP adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. ● 1GE+CATV+VOIP is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. ● 1GE+CATV+VOIP is designed by Realtek chipset 9601D> Comply with GPON G.984/G.988 and IEEE802.3ah standards.
> Support CATV interface for Video Service and remote control by Major OLT
> Support SIP Protocol for VoIP Service
> Integrated line testing compliant with GR-909 on VOIP
> Support NAT, Firewall function.
> Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
> Support port mode of vlan configuration
| Technical Item | Details |
| Pon interface | 1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm single mode，SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Overload optical power: -3dBm(EPON) or - 8dBm(GPON) Transmission distance: 20KM |
| LAN interface | 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
| CATV Interface | RF, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 80dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| VOIP Port | 1×VOIP RJ11 Connector |
| LED | 6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN |
| Push-Button | 2, for Function of Power on/off, Reset |
| Operating condition | Temperature : 0℃～50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition | Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply | DC 12V/1A |
| Power Consumption | <3W |
| Net Weight | <0.2kg |
>Support LAN IP and DHCP Server configuration > Support TR069 Remote Configuration and maintenance
> Support Route PPPoE/DHCP/Static IP and Bridge mixed mode
> Support IPv4/IPv6 dual stack
> Support IGMP transparent/snooping/proxy
> Compatible with popular OLT(HW, ZTE, FiberHome,VSOL...)
| Pilot | Status | Description |
| POWER | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN | On | Port is connected properly (LINK). |
| Blink | Port is sending or/and receiving data (ACT). | |
| Off | Port connection exception or not connected. | |
| VOIP | On | Telephone has registered to the SIP Server. |
| Blink | Telephone has registered and data transmission (ACT). | |
| Off | Telephone registration is incorrect. | |
| Normal (CATV) | On | Input optical power is between -15dbm and 2dBm |
| Off | Input optical power is higher than 3dbm or lower than -15dBm |
| Product Name | Product Model | Descriptions |
| 1GE+CATV+VOIP ONU
| CX01110R01D | 1*10/100/1000M Network port ;1 VOIP port；1CATV ports；external power supply adapter |
| ONU Model | CX01110R01D | CX00110R01D |
|
|
| Feature | 1GE CATV VOIP
| 1GE VOIP
|
|
