Leading Factory for 2.5GE 1GE CATV ONU Customized Manufacturing

● 2.5GE+1GE+CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.

● 2.5GE+1GE+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● 2.5GE+1GE+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0. ● 2.5GE+1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. ● 2.5GE+1GE+CATV is designed by Realtek chipset 9601D

> Supports Dual Mode (can access GPON/EPON OLT).

> Supports SFU and HGU of EPON CTC 3.0 standard > Supports GPON G.984/G.988 standards and IEEE802.3ah. > Support CATV interface for Video Service and remote control by Major OLT > Support NAT, Firewall function. > Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect > Support port mode of vlan configuration

Technical Item	Details
Pon interface	1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Overload optical power: -3dBm(EPON) or - 8dBm(GPON) Transmission distance: 20KM
LAN interface	1x10/100/1000M/2500Mbps auto adaptive Ethernet interfaces Full/Half, 1x10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector
CATV Interface	RF, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 80dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm)
LED	6 LED, For Status of POWER, LOS, PON, LAN1, LAN2,CATV
Push-Button	2, for Function of Power on/off, Reset
Operating condition	Temperature : 0℃～50℃ Humidity :10%～90%（non-condensing）
Storing Condition	Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing）
Power supply	DC 12V/1A
Power Consumption	<3W
Net Weight	<0.2kg

> Support LAN IP and DHCP Server configuration > Support TR069 Remote Configuration and maintenance > Support Route PPPOE/DHCP/Static IP and Bridge mixed mode > Support IPv4/IPv6 dual stack > Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy > Compatible with popular OLT(HW, ZTE, FiberHome,VSOL...)

Pilot	Status	Description
POWER	On	The device is powered up.
POWER	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN	On	Port is connected properly (LINK).
	Blink	Port is sending or/and receiving data (ACT).
	Off	Port connection exception or not connected.
CATV	On	Input optical power is between -15dbm and 2dBm
CATV	Off	Input optical power is higher than 3dbm or lower than -15dBm

● Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) ●Typical Service：Broadband Internet access, IPTV, VOD, CATV and Video Surveillance Q1. Can XPON ONU automatically switch between EPON and GPON modes when it is connected to different types of OLTs? A: Yes, XPON ONU supports dual mode, which can seamlessly switch between EPON or GPON mode according to the type of OLT connected. Q2. Do the SFU and HGU of XPON ONU comply with China Telecom EPON CTC 3.0 standard? A: Yes, XPON ONU meets the requirements of China Telecom EPON CTC 3.0 standard for SFU (Single Family Unit) and HGU (Home Gateway Unit) applications. Q3. Can XPON ONU support cable TV service and remote control? A: Yes, XPON ONU has a CATV port, which can seamlessly support cable TV service and remote control function. Q4. Is XPON ONU compatible with XGSPON environment? A: Yes, XPON ONU is compatible with XGSPON environment for high speed data transmission and enhanced network function. Q5. What additional functions does XPON ONU provide? A: XPON ONU provides various additional functions, such as OMCI control, OAM (operation, administration and maintenance), multi-brand OLT management, TR069, TR369, TR098 protocol, NAT (Network Address Translation), firewall function, high reliability, convenient Management, flexible configuration, and high-quality service ensure an excellent user experience.