4 + 2 + 1 (SFP) -4Port POE, which is a high performance, low power 4 + 2 + 1 10 / 100 / 1000Mbps Ethernet switch, is the primary choice of group and small LAN. It offers four 10 / 100 / 1000Mbp s ports plus 2*10M / 100M / 1000Mbps UP LINK ports and 1*10M / 100M / 1000Mbps SFP UP LINK port to be used to connect upstream devices with higher bandwidth. Store-forwarding technology is adopted to ensure that the bandwidth is effectively allocated to each port. Full speed gigabit connect to workgroups or servers for easy plug and play, this flexible blocking-free architecture, users can be free by bandwidth and media networks. The switch supports half-duplex and full-duplex working mode, each switching port supports adaptive function, the port adopts storage and forwarding mode, the product is superior in performance, easy to use, convenient and intuitive, providing an ideal networking solution for working group users or small LAN.
◆ Support for the IEEE 802.1Q VLAN
◆ Full and half duplex operation using IEEE 802.3X x flow control and reverse pressure
◆ Support 9216 bytes giant packet length forwarding on wire speed
◆ Supports the 96-entry ACL rules
◆ Support for 2K MAC address
| Chip scheme | RTL8367S+RTL8211F | |
| Standards / protocols | IEEE 802.1Q , IEEE 802.1x,IEEE 802.3ad,IEEE 802.3af/at | |
| Network media | 10B ASE-T: Unshielded Class 3,4,5 twisted pair (max. 100m)100B ASE-TX / 100B ASE-T: twisted over 5, over 5 (maximum 100m)1000B ASE-TX / 1000B ASE-T: twisted pair above class 6 (maximum 100m) | |
| Joggle | 410 / 100 / 1000M RJ45 ports (Auto Negotiation / Auto MDI / MDIX)210 / 100 / 1000 MUP-LINK ports and 1 SFP 10M / 100M / 1000Mbps UP LINK port | |
| The MAC address is null volume | 2K | |
| exchange capacity | 14Gbps | |
| Package forwarding rate | 10.416Mpps | |
| Package cache | 1.5Mbits | |
| Giant frame | 9216-byte | |
| source | Built-in power supply is 65W | |
| The POE port has the output power | 30W (single-port MAX) | |
| quiescent dissipation | 0.428W （220V/50Hz） | |
| Power pin | 1 / 2 (+), 3 / 6 (-) (POE ports only) | |
| Speed limit function | Support for the speed limit of 10M | |
| pilot lamp | Each | Power. System (Power: red light) When the load status of the indicator is: orange for VLAN / 10M, red without VVLAN / 10M |
| Each port | Link / Activity (Link / Act: green) access the signal status: orange when the network and POE are connected at the same time; red with POE without network, green for network without POE. | |
| service environment | Operating temperature: -10℃ ~ 70℃ (32 ℉ ~127 ℉)Storage temperature: -40℃ ~85℃ (-97 ℉ ~142 ℉)Working humidity: 10%~90% without condensation Storage humidity: 5%~95% condensation | |
| Case material | Standard Hardware Case | |
| Case size | 190*39*121mm | |
◆ Support for IEEE802.3 af / at
◆ Support for IVL, SVL, and and IVL / SVL
◆ Supports the IEEE 802.1x access control protocol
◆ Support for IEEE 802.3az EEE (Energy-Efficient Ethernet)
◆ Supports the 25M clock, and the RFC MIB counter
| Product Name | Product Model | Descriptions |
| 4 Gigabit POE+2 Gigabit uplink+1 Gigabit SFP port switch
| CT-4GEP+2GE+SFP | 4*10/100/1000M POE port; 2*10/100/1000M uplink port; 1*10/100/1000M SFP port; external power adapter
|
This POE switch is widely used in small LANs:Network surveillance, wireless networks, retail and catering venues
