● 1GE+CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.
● 1GE+CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT. ● 1GE+CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China telecommunication EPON CTC3.0. ● 1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah. ● 1GE+CATV is designed by Realtek chipset 9601D> Supports Dual Mode (can access GPON/EPON OLT).
> Supports SFU and HGU of EPON CTC 3.0 standard > Supports GPON G.984/G.988 standards and IEEE802.3ah. > Support CATV interface for Video Service and remote control by Major OLT > Support NAT, Firewall function. > Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect > Support port mode of vlan configuration![](http://kehu02.grofrom.com/www.szceitatech.com/37c7a556ec53cfa39fbb31c75b261673.jpg)
![](http://kehu02.grofrom.com/www.szceitatech.com/3a8032334857677602a2d02f6cd89d7c.jpg)
Technical Item | Details |
Pon interface | 1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
LAN interface | 10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector |
CATV Interface | RF, optical power : +2~-15dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 80dBuV(-7dBm optical input) AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), >35(-10dBm) |
LED | 6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN |
Push-Button | 2, for Function of Power on/off, Reset |
Operating condition | Temperature : 0℃~50℃ Humidity :10%~90%(non-condensing) |
Storing Condition | Temperature : -40℃~+60℃ Humidity :10%~90%(non-condensing) |
Power supply | DC 12V/1A |
Power Consumption | <3W |
Net Weight | <0.2kg |
![](http://kehu02.grofrom.com/www.szceitatech.com/2df306ec7fdc8aca4b659563fb4f6db1.png)
![](http://kehu02.grofrom.com/www.szceitatech.com/d1f8fd801e24f523c1d9544e481c88c3.jpg)
![](http://kehu02.grofrom.com/www.szceitatech.com/05b5d16e0029b3087d6aec06518c3769.jpg)
Pilot | Status | Description |
POWER | On | The device is powered up. |
Off | The device is powered down. | |
LOS | Blink | The device doses not receive optical signals. |
Off | The device has received optical signal. | |
PON | On | The device has registered to the PON system. |
Blink | The device is registering the PON system. | |
Off | The device registration is incorrect. | |
LAN | On | Port is connected properly (LINK). |
Blink | Port is sending or/and receiving data (ACT). | |
Off | Port connection exception or not connected. | |
NORMAL | On | Input optical power is between -15dbm and 2dBm |
Off | Input optical power is higher than 3dbm or lower than -15dBm | |
WARN | On | Input optical power is higher than 2dBm or lower than -15dBm |
Off | Input optical power is between -15dBm and 2dBm |